Tag Archives: how to bass fish in Arizona

Roosevelt fishing enhancements continue: 40,000 bass stocked

AZGFD Fisheries Program Biologist Bryant Dickens unloads some of the 40,000 Florida-strain largemouth bass fingerlings that were stocked Thursday morning into Roosevelt Lake. — George Andrejko/AZGFD


Florida-strain largemouth bass stockings continued at Roosevelt Lake on Tuesday, with a morning stocking of 40,000 fingerlings.

A habitat improvement project also is upcoming. Since April, 2014, about 1 million fry (recently hatched) of the Florida-strain bass, which can grow up to 20 pounds, have been stocked into Roosevelt Lake.

This is one way fishing memories are created.


A Florida-strain largemouth bass fingerling.


Already, early indications give some hope for a robust population of catchable (8-10-inch bass) by this fall, and, in 4-5 years, the hope that trophy bass will be available at this rejuvenating fishery.

Rearing Florida-strain bass at Bubbling Ponds Fish Hatchery


Bubbling Ponds FIsh Hatchery near Cornville, Arizona is the site of reared Florida-strain largemouth bass
Bubbling Ponds Fish Hatchery near Cornville, Arizona is the site of reared Florida-strain largemouth bass


The hatchery has 300 Florida-strain bass that in 2015 were trucked from Florida to Arizona. These fish are eating well and growing — currently they’re about 8 inches in length.

These bass are planned to be AZGFD’s own brood stock.  They will be grown until they reach maturity and then AZGFD will spawn them annually.

The young will be stocked into approved Arizona lakes.

Florida Largemouth bass on APril 20, 2016, from Bubbling Ponds Fish Hatchery
A larger strain of bass is being reared at the Bubbling Ponds Fish Hatchery near Cornville, Ariz.

“This is my first time raising these fish,” said Sarah Taylor,  a Bubbling Ponds Fish Hatchery manager. “It has been a challenge, but we are getting our techniques dialed in as we go.  Things seem to be going well.”

Bass fishing tips and tricks videos

If you’re learning how to bass fish in Arizona, we’ve got a toolbox of helpful videos to get you on some fish.

This is “B’Theory,” by a former local guide Mike McFarland. Wherever there are bugs, there are baitfish. Wherever there are bugs and baitfish, there are bluegill. And where there are baitfish and bluegill — there are bass:

Arizona bass fishing videos

Be sure to add our YouTube playlist, “Fishing Tips,” which is comprised of eight bass fishing videos, to your playlist.

Good luck!

Striped bass abundant, tasty, at Lake Pleasant


Barry Worman, administrator of the Facebook page “Arizona Striper Fishing,” with an average 12-inch striper caught Friday, Sept. 18 from Lake Pleasant.


Some misspell them, “strippers.” True enough, they are just that: strippers of line.

Today, though, we’ll be talking about stripers.

Just northwest of Phoenix, the striped bass fishery is buzzing. Lake Pleasant is a haven for these linesiders, known for their line-stripping potential, excellent table fare (their mild, white meat is great for fish tacos) and, under special regulations at this 9,500-lake, no bag limit.

Great to eat. No bag limit.

Yep, and this type of fishing is suitable for men and women, great-grandparents and children.

So during the next month or so, here’s one way to catch these feisty fighters.

Summer and early fall striper fishing at Lake Pleasant, Arizona




Fishing at night is usually the best option during the summer and early fall. The process can be simple: submersible lights below the boat at Lake Pleasant (above) attract tiny shad, and the shad attract the predatory striped bass. The green-tinted surface shows juvenile stripers chasing and flashing and dicing balls of one-inch shad. Nature’s aquarium.

A key is to find darkness. Again, fish at night. And away from full moons and removed from other boaters who are dropping submersible lights. Check a solunar calendar before heading out.

On Friday, Sept. 18, multiple boats — 13 in an 80-yard radius — flashed their green submersible lights. Coupled with red-and-yellow lights streaking off the dam, the scene hinted at Christmas:


FullSizeRender (1)


It also meant the lights weren’t as effective because, in this scenario, the shad  disperse among the additional light. Anglers want them congregated. Find a lonely cove on a new-to-quarter moon. Corner the shad market.

Boat anglers can head out with medium-action spinning rods filled with 12-pound fluorocarbon line (or monofilament to save some money.) Rig up a dropshot with No. 2 baitholder or circle hooks and 1/2-ounce weights. Do not set the hook with circle hooks; baitholder hooks, on the other hand, will allow the angler to set the hook, an advantage with light, bait-thieving bites.

Don’t forget the fishing license – purchase one online to help conserve wildlife for our future fisher-children, and grandchildren 

Also pick up some anchovies (the north Phoenix Sportsman’s Warehouse and most WalMarts have them) and keep them frozen in an ice chest. Head out to 50 to 100 feet of water and lower the submersible lights, chum the waters with bits of anchovies, kick back, and tell your fishing buddy a couple old line-soaking stories (true or not) as the food chain under the boat forms like bubbles into foam.

In general, quality stripers tend to suspend right off the bottom, and aggressive, smaller fish around the middle of the water column.

Monitor the fish finder for the indications of fish. If you’re fishing from a kayak/canoe, cover a lot of water until you find the bite.

Cut one-inch sections of anchovies (frozen anchovies stay on the hook much longer). Hook a piece anchovy through one side of the skin, rotate the hook 180 degrees, and hook it back through the anchovy. If your fish finder is marking fish at, say, 30 feet, or on the bottom, drop the rig into the water, counting the seconds it takes for the bait to get into the target area. Keep that count in your mind — once you’ve found the depth of the fish, it’ll be time to figure out the next number on the fish-finding combination: the bite and hook-set.

“There are three types of bites here,” said Barry Worman, moderator of the popular Arizona Striper Fishing Facebook page and, during this calm, star-smeared night, boat operator.

“One is the ‘dink, dink dink,’ really weak bites: these guys are master thieves at getting anchovies off. The second is where you get two feet of slack (in your line). They’re coming up, so you’ve got to reel in the slack and whack them. The third bite is your rods just bends.”

Arizona fishing offers more than just striper action at Lake Pleasant, so see our www.azgfd.gov fishing page for a mixed bag of resources, such as stocking schedules, maps of our top fisheries (including access points to Lake Pleasant), and details of where to fish.

Mmm … fish tacos


FullSizeRender (2)


Stripers make for great fish tacos because of their mild, flaky, white meat, and medium texture. Also, the average-sized striper (10-12 inches) naturally fits into taco shells. If anything were meant to be …

And here’s why: once an angler fillets a striper, he or she should cut out the blood line along the center. With average stripers, that leaves two strips tailor-made to relax in those crunchy or soft, curved-corn delicacies.

Here one way to prepare them: dip the fillets in an egg wash and roll ‘em a bed of white corn meal and either Panko bread crumbs or your favorite spices (I used a creole seasoning). Heat vegetable oil (enough in the pan so the fillets float) to the point that a pinch of corn meal flicked into the oil will sizzle. Fry for 3-5 minutes, depending on the size of the fillets.

Fish tacos can be as simple as adding your favorite salsa and greens. Simple can be delicious.

As head we deeper into fall, expect successful striper techniques to involve jigs and swimbaits. Stay tuned to this blog for updates. Also, the Arizona Striper Fishing Facebook page has a helpful article on jigging for stripers.

In the end, whether you’re catching stripers or “strippers,” the result is the same: lots of action, unlimited bag limits, and local, organic fish.